In short
Why CCTV motion detection sends so many false alerts, how AI human and vehicle detection filters them, and the settings that cut false alarms on any camera.
Basic CCTV motion detection alerts you whenever enough of the picture changes, so headlights, rain, shadows, swaying leaves, pets and insects near the lens all set it off. AI human and vehicle detection checks what moved and alerts you only for people or vehicles. If your phone buzzes all night with alerts showing nothing, AI detection, or better motion detection settings, is the fix.
Key Takeaways
- Standard motion detection compares video frames and reacts to any change in pixels.
- AI detection classifies what moved. Hikvision says its AcuSense cameras label events as “human”, “vehicle” or “other”, and disregard things like rain drops, animals and moving foliage.
- Detection zones, sensitivity and line crossing cut false alerts on most cameras, with or without AI.
- Our AI CCTV packages range from AI Lite (EZVIZ, human shape detection) to AI Pro (Uniview, cross line and intrusion detection, car plate comparison).
How does CCTV motion detection work?
Video motion detection is a camera or recorder function that compares each video frame with the one before and triggers an event when the change in a part of the picture is larger than the sensitivity you set. It needs no extra hardware, which is why almost every camera has it. Our guide on how motion detection cameras work explains the basics, and how to enable Hikvision motion detection walks through the settings.
Some cameras, often battery-powered wireless ones, use a PIR sensor instead or as well. A PIR (passive infrared) sensor is a sensor that reacts to heat moving across its view, so it ignores shadows and lights but can still be set off by pets and hot air.
Why does motion detection give so many false alerts?
Pixel-based motion detection cannot tell what changed, only that something did. Common triggers we see on Singapore sites:
- Car headlights sweeping across a gate or driveway at night.
- Heavy rain and spider webs or insects in front of the lens, lit up by the infrared.
- Trees, plants and laundry moving in the wind.
- Sunlight and cloud shadows moving across the floor.
- Cats, birds and dogs.
Each false alert makes the real ones easier to miss, and many people end up switching alerts off altogether.
What does AI human and vehicle detection add?
AI detection adds a second step: when something moves, the camera or recorder checks whether it is a person or a vehicle before raising an alarm. Hikvision describes its AcuSense devices as using a deep learning algorithm that labels live video as “human”, “vehicle” or “other events”. Only human and vehicle events trigger alarms, while “rain drops, animals, or the movement of foliage” are disregarded. Hikvision claims an accuracy approaching 98%; that is the manufacturer’s figure.
The same classification makes footage easier to search, because events are sorted by type. You can look for “people at the gate last night” instead of scrolling through every leaf that moved. More advanced systems add rules. Line crossing detection is an alert when a person or vehicle crosses a line you draw on the picture, and intrusion detection is an alert when one enters a zone you mark.
Motion detection vs AI detection compared
| Standard motion detection | AI human and vehicle detection | |
|---|---|---|
| What triggers an alert | Any change in the picture above the sensitivity level | A moving person or vehicle |
| False alerts from rain, leaves, lights, pets | Common | Far fewer |
| Searching footage | By time and motion events | By type: people or vehicles |
| Extra rules | Detection zones, schedules | Line crossing, intrusion zones, enter and leave area |
| Hardware | Almost every camera | AI-capable camera or recorder |
How to reduce false motion alerts on any camera
- Draw a detection zone that covers the gate, door or path, and leave out the road, trees and sky.
- Lower the sensitivity a step at a time until shadows and rain stop triggering it.
- Set a schedule so alerts only come when you are away or asleep.
- Move or angle the camera away from headlights and moving plants.
- Clean the lens and housing and clear spider webs; infrared lights them up at night. Our CCTV maintenance service covers this.
- Use line crossing or intrusion rules if your camera has them, instead of plain motion.
Should you upgrade to AI CCTV?
If you rely on phone alerts at a gate, a driveway, a shop front or an office after hours, AI detection is usually worth it, because it is the difference between alerts you read and alerts you ignore. If you only play back footage after something happens, standard motion detection with good zones may be enough.
Our AI CCTV packages run from AI Lite, an EZVIZ wireless camera with human shape detection and tracking, through AI+ with Hikvision face recognition, to AI Pro with Uniview cross line detection, intrusion detection and car plate comparison, and AI Ultra for custom projects. Tell us what you want to be alerted about and we will recommend the right level.
Get fewer false alerts
CCTVSG.NET has supplied and installed CCTV in Singapore since 2011. Send us a screenshot of your camera view and the alerts you get, and we will suggest settings or an upgrade. Request a quote or contact us.
Sources
- Hikvision, “Hikvision launches new generation of AcuSense products” (2020): https://www.hikvision.com/en/newsroom/latest-news/2020/hikvision-launches-new-generation-of-acusense-products/
Frequently asked questions
- Why does my CCTV send motion alerts at night when nothing is there?
- Usually insects, spider webs or rain in front of the lens, lit up by the infrared, or car headlights. Clean the lens, narrow the detection zone, lower the sensitivity, or use a camera with human and vehicle detection.
- Can I add AI detection to my existing CCTV?
- Sometimes. Some AI recorders can analyse video from existing cameras, but many AI features need AI-capable cameras. Send us your camera and recorder models and we will check.
- Does motion detection save hard disk space?
- Yes, if the recorder is set to record only on motion events instead of continuously. Our hard disk calculator shows how much storage each setting needs.
Want this done for you?
We supply and install CCTV, door access, video intercom and Wi-Fi systems across Singapore, from Hikvision, Uniview, Vstarcam, TP-Link, Ruijie and EZVIZ. Send a photo or floor plan and we will recommend a setup and a fixed price.