What is Hikvision Hik-connect ?
Hik-Connect is free P2P service provided by Hikvision. The purpose of the service is to allow your mobile devices or PC to easily communicate with Hikvision products, such IP Camera, NVR, DVR, etc.
P2P, or Peer to Peer is a network protocol used by IP devices and software application to establish the communication without the need to do any port forwarding at the firewall.
In addition, Dynamic DNS will not be required either due to the nature of peer-to-peer connection.
How to use Hikvision Hik-Connect in IVMS-4500
If you have purchased the Hikvision IP Camera, NVR, or DVR, and would like to find out how to use Hikvision Hik-Connect in iVMS-4500, you can refer to the below step-by-step guide to set it up. Let’s get started now!
2. Enable the Hik-Connect Service at the Hikvision’s Device
By default, the Hik-Connect service at all the Hikvision’s products are turned off. You will need to turn it on before you can use it. We will use Hikvision IP Camera DS-2143G0-I as an example to show you how to enable the service.
Login the IP Camera with the web browser (If you don’t know how to do that and if you are our existing customer, please contact us to get support).
Go to “Configuration” -> “Network” -> “Advanced Settings” -> “Platform Access”. Tick the “Enable”. Set a verification code as instructed.
Please do remember the verification code you have set, as we are going to need it in a while. When you have done the setting, click “Save” to effect the changes.
3. Register or Login to Hik-Connect Service
Open your iVMS-4500 on your iPhone or Android Phone, click the top left corner, followed by clicking “Hik-Connect”.
You will see the login page of Hik-Connect service. Click “Login”. (If you haven’t registered with the service before, click “Register” to register an account by following the onscreen instructions.)
4. Add the Hikvision Device to Hik-Connect
After you have logged in the Hik-Connect service, you will need to add your Hikvision Device to the Hik-Connect to start using the service. Click the “+” icon on the top right corner.
You will see the barcode scanning function now, scan the barcode of the Hikvision device to add it to the Hik-Connect service. Alternatively, you can also manually add the serial number. You should be able to see the serial number of the Hikvision device you are trying to add. Click “Search” . Once you can see the device’s model number with the serial number, that means your Hikvision device is already available to be added. Click the “+” icon. You will now be asked to enter the verification code (this is the code you have set in Step 2).
5. View the Hikvision Device in Hik-Connect with iVMS-4500
After you have entered the correct verification code, you will see the list of the Hikvision devices which are already in the Hik-Connect service. Click the device now
Click “Start Live View” to watch the live view. You will now be asked to enter the verification code again.
All good! Now you can watch the live view of the Hikvision Devices via Hik-Connect! In this case, don’t worry about changing the internet router or setting up the DDNS, the Hikvision IP Camera, DVR, or NVR will simply be in the plug-and-play mode now.
We provide a variety of famous brands in CCTV industry, such as Hikvision, Dahua, Avtech, Vstarcam, SAFEVue, and more. We ensure top quality and high service standard to serve our customer better.
You may contact or visit us to let us know your requirements and your site condition, and then we will provide you the professional consultation on CCTV camera system. You can also request an obligation free site survey, our installer will visit your place and discuss with you on site.